ASTM F1019M-00 (R2018) pdf free download.Standard Specification for Steel Deck Gear Stowage Box (Metric).
1.1 This specification covers the design. material, and manufacture of steel deck gear stowage boxes.
1.2 This specitication shall not be used for life preserver or pyrotechnic stowage.
1.3 The values stated in SI units are to he regarded as standard. The values given in parentheses after SI units are included for information only and are not considered standard.
2. Referenced Documents
2. 1 ASTM Standards:
A36/A36M Specification for Carbon Structural Steel
A123/A123M Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
2.2 Other Documents:
ABS Rules for Building and Classing Steel Vessels
SSPC Specification
AWS Dl.l Structural Welding Code
3. Classification
3. 1 Deck Gear Stowage Boxes, shall be the following types:
3.1.1 Type I—Conforming to all dimensions in Fig. 1, Fig. 2, [:ig. 3. Fig. 4. Fig. 5. Fig. 6. Fig. 7. Fig. 8, and Fig. 9.
3. 1 .2 Type 11—Conforming only to Fig. 1 configuration and meeting the requirements of Sections 4 — 7. dimensions and material specification made to fit unique requirements of customer.
4. Ordering Information
4. 1 Order using this ASTM designation. year of issue, and
5. Materials and Manufacture
5. I Maiericil.v:
5.1.1 The steel for the deck box shall be in accordance with Specification A36/A36M.
5.1.2 Nuts, bolts, and washers shall he corrosion-resistant materials.
5. 1 .3 Materials used in construction of this box and its packaging shall be free of asbestos and cadmium.
5.2 Manufacture:
5.2.1 Stowage boxes shall he constructed in accordance with figures appearing in this standard.
5.2.2 Welding shall be in accordance with ABS Rules for Building and Classing Steel Vessels or AWS Dl.l Structural Welding Code unless otherwise specified.
6. Dimensions and lolerances
6. 1 Dimensions are as indicated.
6.2 Tolerance—I .5 mm.
7. Workmanship, Finish, and Appearance
7.1 The entire assembly shall be free of weld spatter, slag, splinters, sharp edges. projections, and other defects that may be hazardous to personnel.
7.2 The box shall be cleaned after assembly to a commercial finish in accordance with SSPC-SP6.
7.3 All surfaces except gratings and covers shall be coated ith one coat of commercial quality anticorrosive, lead-free,
chromate-free primer to a minimum dry film thickness of 50 aim.
7.4 Gratings and covers shall be galvanized in accordance with Specification A 123/A123M.ASTM F1019M pdf download.