EN IEC 60603-7:2020 pdf download.Connectors for electronic equipment
I Scope
This part of IEC 60603-7 covers 8-way, unshielded, free and fixed connectors and is intended to specify the common dimensions (interface dimensions), mechanical, electrical and environmental characteristics and tests for the family of IEC 60603-7-x connectors.
These connectors are intermateable (according to IEC 6 1076-1 level 2) and interoperable with other IEC 60603-7 series connectors.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-581:2008, International Electrotechnical Vocabulary (1EV) — Part 581:
Electromechanical components for electronic equipment
IEC 60068-1, Environmental testing — Part 1: General and guidance
IEC 60068-2-38: Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test
IEC 60352-2, Solderless connections — Part 2: Crimped connections — General requirements, test methods and practical guidance
IEC 60352-3, Solderless connections — Part 3: Accessible insulation displacement (ID) connections — General requirements, test methods and practical guidance
IEC 60352-4, Solderless connections — Part 4: Non-accessible insulation displacement (ID) connections — General requirements, test methods and practical guidance
IEC 60352-5, Solderless connections — Part 5: Press-in connections — General requirements, test methods and practical guidance
lEG 60352-6, Solderless connections — Part 6: Insulation piercing connections — General requirements, test methods and practical guidance
JEC 60352-7, Solderless connections — Part 7: Spring clamp connections — General requirements, test methods and practical guidance
IEC 60512-1, Connectors for electrical and electronic equipment — Tests and measurements — Part 1: Generic specification
IEC 60512-1-1, Connectors for electronic equipment — Tests and measurements — Part 1-1:General examination — Test la: Visual examination
IEC 60512-1-2, Connectors for electronic equipment — Tests and measurements — Part 1-2:General examination — Test lb. Examination of dimensions and mass
IEC 60512-1-100, Connectors for electronic equipment — Tests and measurements — Part 1- 100: General — Applicable publications
IEC 60512-2-1, Connectors for electronic equipment — Tests and measurements — Part 2-1:Electrical continuity and contact resistance tests — Test 2a: Contact resistance — Millivolt level method
IEC 60512-2-5, Connectors for electronic equipment — Tests and measurements — Part 2-5:Electrical continuity and contact resistance tests — Test 2e: Contact disturbance
IEC 60512-3-1, Connectors for electronic equipment — Tests and measurements — Part 3-1:Insulation tests — Test 3a: Insulation resistance
IEC 60512-4-1, Connectors for electronic equipment — Tests and measurements — Part 4-1:Voltage stress tests — Test 4a: Voltage proof
IEC 60512-5-2, Connectors for electronic equipment — Tests and measurements — Part 5-2. Current-carrying capacity tests — Test 5b: Current-temperature derating
IEC 60512-6-4, Connectors for electronic equipment — Tests and measurements — Part 6-4:Dynamic stress tests — Test 6d: Vibration (sinusoidal)
IEC 60512-9-1, Connectors for electronic equipment — Tests and measurements — Part 9-1:Endurance tests — Test 9a: Mechanical operation
IEC 60512-9-2, Connectors for electronic equipment — Tests and measurements — Part 9-2:Endurance tests — Test 9b: Electrical load and temperature
IEC 60512-11-4, Connectors for electronic equipment — Tests and measurements — Part 11-4:Climatic tests — Test lid: Rapid change of temperature
IEC 60512-11-7, Connectors for electronic equipment — Tests and measurements — Part 11-7:Climatic tests — Test I Ig: Flowing mixed gas corrosion test
IEC 60512-13-2, Connectors for electronic equipment — Tests and measurements — Part 13-2:Mechanical operation tests — Test 13b: Insertion and withdrawal forces
IEC 60512-15-6, Connectors for electronic equipment — Tests and measurements — Part 15-6:Connector tests (mechanical) — Test 15f: Effectiveness of connector coupling devices
IEC 60603-7 (all parts), Connectors for electronic equipment
IEC 60664-1, insulation coordination for equipment within low-voltage systems — Part 1:Principles, requirements and tests
IEC 61076-1:2006, Connectors for electronic equipment — Product requirements — Part 1:Generic specification
IEC 61076-3, Connectors for electronic equipment — Product requirements — Part 3:Rectangular connectors — Sectional specification.EN IEC 60603-7 pdf download.