IEC 60417-1:2000 pdf download.Graphical symbols for use on equipment
1 Scope
This part of IEC 60417 contains graphical symbols and their meaning (title and application).
The graphical symbols in the standard are primarily intended
●to identifty the equipment or a part of the equipment (e.g. a control or display);
●to indicate functional states (e.g. on, off, alarm);
●to designate connections (e.g. terminals, fling points for materials);
●to provide information on packaging (e.g. identification of content, instructions for handling);
●to provide instruction for the operation of the equipment (e.g. limitations of use).
This part 1 provides reference information to help users find appropriate graphical symbols.
This part is not intended for reproduction purposes.
The graphical symbols specified in this standard are not primarily intended for
●safety signs;
●public information;
●use for drawings;
●use in technical documentation of products.
In the case of the use of graphical symbols as safety signs, the rules specified in Iso 3864 prevail.
2 Normative references
The following normative documents contain provisions which, through reference in this text,constitute provisions of this International Standard. For dated references， subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possiblility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards.
IEC 60050(441): 1984，International Electrotechnical Vocabulary (IEV) 一Chapter 441:Switchgear, controlgear and fuses
IEC 60204-1:1997, Electrical equipment of industrial machines - Part 1: General requirements
IEC 60416:1988, General principles for the creation of graphical symbols for use on equipment
IEC 60601-1:1988, Medical electrical equipment - Part 1: General requirements for safety
IEC 60747-1:1983, Semiconductor devices - Discrete devices and integrated circuits - Part 1:General
IEC 61010-1:1990, Safety requirements for electrical equipment for measurement, control, and laboratory use一Part 1: General requirements
IEC 61140:1997, Protection against electric shock - Common aspects for installation and equipment
IEC 61310-1:1995， Safety of machinery - Indication, marking and actuation - Part 1:Requirements for visual, auditory and tactile signals
ISO 3864:1984, Safety colours and safety signs
ISO 7000:1989, Graphical symbols for use on equipment - Index and synopsis
ITU-T E121:1996, Pictograms, symbols and icons to assist users of the telephone service.IEC 60417-1 pdf download.