IEC 61508-7:2000 pdf download.Functional safety of electrical/electronic/programmable electronic safety-related systems
1 Scope
1.1 This part of IEC 61508 contains an overview of various safety techniques and measures relevant to IEC 61508-2 and IEC 61 508-3.
NOTE The references should be considered as basic references to methods and tools or as examples, and may not represent the state of the art.
1.2 IEC 61508-1, IEC 61508-2, 1EC 61508-3 and IEC 61508-4 are basic safety publications,although this status does not apply in the context of low-complexity E/E/PE safety-related systems (see 3.4.4 of IEC 61508-4). As basic safety publications, they are intended for use by technical committees in the preparation of standards in accordance with the principles contained in IEC Guide 104 and ISO/IEC Guide 51. IEC 61508 is also intended for use as a stand-alone standard.
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its own publications. In this context， the requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the publications prepared by those technical committees.
NOTE 1 The functional safety of an E/E/PE safety-related system can only be achieved when all related requirements are met. Therefore it is important that all related requirements are carefully considered and adequately referenced.
NOTE2 In the USA and Canada, until the proposed process sector implementation of IEC 61508 (ie. IEC 61511) is published as an international standard in the USA and Canada, existing national process safety standards based on IEC 61508 (i.e. ANSIISA S84.01-1996) can be applied to the process sector instead of IEC 61508.
1.3 Figure 1 shows the overall framework for parts 1 to 7 of this standard and indicates the role that IEC 61 508-7 plays in the achievement of functional safety for E/E/PE safety-related systems.
2 Normative references
The following normative documents contain provisions which, through reference in this text,constitute provisions of this part of IEC 61508. For dated references, subsequent amend-ments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC 61508 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.
IEC 61508-1:1998, Functional safety of electrical/electronic/programmable electronic safety-related systems一Part 1: General requirements
IEC 61508-2, Functional safety of electrical/electronic/programmable electronic safety-related systems一Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems 1 )
IEC 61508-3:1998, Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
IEC 61508-4:1998, Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations of terms
IEC 61508-5:1 998, Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5 Examples of methods for the determination of safety integrity levels
IEC 61508-6, Functional safety of electricallelectronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 1)
IEC Guide 104:1997， The preparation of safety publications and the use of basic safety publications and group safety publications
IEC/ISO Guide 51:1990, Guidelines for the inclusion of safety aspects in standards.IEC 61508-7 pdf download.