IEEE Std C57.12.30:2020 REDLINE pdf download.IEEE Standard for Pole-Mounted Equipment -Enclosure Integrity for Coastal Environments.
IEEE Std C57.12.30 covers conformance tests and requirements for the enclosure integrity of pole- mounted electrical equipment intended for installations in coastal environments. These enclosures contain electrical, containing apparatus energized in excess of 600 V, typically not accessible to the general public, including, such a but not limited tOL the following types of equipment:
a) Pole-mounted distribution transformers
b) Pole-mounted switches
c) Pole-mounted regulators
d) Pole-mounted metering equipment
e) Pole-mounted reclosers/sectionalizers
f) Pole-mounted capacitors
1.2 Purpose
The purpose of this standard is to describe the requirements for a comprehensive enclosure integrity system for pole-mounted equipment enclosures providing long service life with minimum maintenance.
1.3 Word usage
The word shall indicates mandatory requirements strictly to be followed in order to conform to the standard and from which no deviation is permitted (shall equals is required to).
The word should indicates that among several possibilities one is recommended a prtcHlirl’ suitable, without mentioning or excluding others; or that a certain : irse of action is preferred but not necessarily required (should equals is recommended to).
The word mail is used to indicate a course of action permissible within the limits of the standard (may equals is permitted to).
The word can is used for statements of possibility and capability1 whether material, physical. or causal (caii equals is able to).
2. Normative references
The following referenced documents are indispensable for the application of this document (i.e., they must be understood and used, so each referenced document is cited in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies.
ASTM D3170, Standard Test Method for Chipping Resistance of Coatings.
ASTM D3359, Standard Test Methods for Measuring Adhesion by Tape Test.
ASTM D3363, Standard Test Method for Film Hardness by Pencil Test.
ASTM D4060, Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser.
ASTM D4585, Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation.
ASTM D4587, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings.IEEE Std C57.12.30 pdf download.