UL 2054:2021 pdf download.STANDARD FOR SAFETY-Household and Commercial Batteries.
1.1 These requirements cover portable primary (nonrechargeable) and secondary (rechargeable) batteries for use as power sources in products. These batteries consist of either a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by chemical reaction.
1.2 These requirements are intended to reduce the risk of fire or explosion when batteries are used in a product. The proper use of these batteries in a particular application is dependent on their use in a complete product that complies with the requirements applicable to such a product.
1.3 These requirements are intended to cover batteries for general use and do not include the combination of the battery and the host product which are covered by requirements in the host product standard.
1.4 These requirements are also intended to reduce the risk of injury to persons due to fire or explosion when batteries are removed from a product to be transported, stored, or discarded.
1.5 These requirements do not cover the toxicity risk that results from the ingestion of a battery or its contents, nor the risk of injury to persons that occurs if a battery is cut open to provide access to its contents.
2 Units of Measurement
2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information.
3 Components
3.1 A component of a product covered by this Standard shall:
a) Comply with the requirements for that component as specified in this Standard;
b) Be used in accordance with its rating(s) established for the intended conditions of use; and
C) Be used within its established use limitations or conditions of acceptability.
3.2 A component of a product covered by this Standard is not required to comply with a specific component requirement that:
a) Involves a feature or characteristic not required in the application of the component in the product;
b) Is superseded by a requirement in this standard; or
c) Is separately investigated when forming part of another component, provided the component is used within its established ratings and limitations.
3.3 A component shall be used in accordance with its rating established for the intended conditions of use.UL 2054 pdf download.