UL 697:2021 pdf download.STANDARD FOR SAFETY-Toy Transformers.
1.1 These requirements cover toy transformers designed to be used on nominal 120-V branch circuits. A toy transformer is a step-down isolating transformer of the low-secondary-voltage type. It is intended primarily to supply current to electrically operated toys, and as such is expected to be subjected to careless use and probable short circuit of the secondary terminals. Accordingly, the design of a toy transformer takes into consideration the rather unusual risk of fire that may be involved, and the construction is made to reduce the risk of fire with respect to the ignition of nearby combustible material as the result of overheating or eventual inoperative condition of the transformer itself.
1.2 These requirements do not cover toys or the like designed to operate from the secondary output of a toy transformer.
1.3 Toy transformers marked “Class 2” are evaluated to the requirements in the Standard for Class 2 Power Units, UL 1310, and to the requirements in this Standard.
2 Components
2.1 Except as indicated in 2.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components generally used in the products covered by this standard.
2.2 A component is not required to comply with a specific requirement that:
a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or
b) Is superseded by a requirement in this standard.
2.3 A component shall be used in accordance with its rating established for the intended conditions of use.
2.4 Specific components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specified limits, and shall be used only under those specific conditions.
3 Units of Measurement
3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or
approximate information.
4 Undated References
4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard.
5 Glossary
5.1 For the purpose of this Standard the following definitions apply.UL 697 pdf download.