CSA Z195.1:2016 pdf download.Guideline for selection, care, and use of protective footwear
2.1 Suggested protection for various hazards
Products should be certified and marked with the specific hazard protection options. Table 1 identifies the footwear protection options for various workplace hazards. It also indicates types of footwear that should not be used for certain hazardous situations. Do not assume any protection is offered beyond the indicated protection. For hazards not specifically covered in Table 1, consult the footwear supplier for advice on appropriate protection.
Note: Always choose footwear that wil provide the necessary protection. Do not assume that a certain type of job always demands the same footwear. Different working environments can present different hazards. A hazard assessment of the working environment and the nature of the job should be conducted prior to use of this selection guideline. Some work environments can contain multiple hazards. In such cases, footwear that provides protection in more than one category (i.e., combined performance) should be selected.
3.3 Maintenance and disposal recommendations
Recommendations for maintaining the effectiveness of footwear are as follows:
a) Check protective footwear before and after each use. If there are any cracks in the soles, breaks in the leather, exposed toecaps, or similar damage that reduces the protective qualities of the footwear, the footwear should be replaced.
b) When protective footwear in the workplace is replaced, it can be because the original footwear is no longer considered appropriate for use. Therefore, all used protective footwear which is deemed unsafe should be destroyed. Do not recycle it for home use in situations where a danger to feet (e.g., a lawnmower) is present.
c) The tread of the footwear should be kept clean in order to maximize slip resistance.
d) Refer to the manufacturer's instructions for proper storage, cleaning, and care of the footwear.
e) If footwear has been exposed to sole penetration or severe impact, foot protection can be compromised without any outward signs of damage. It is advisable to replace footwear after sole penetration or severe impact to ensure protection in the event of another accident, even if there are no outward signs of damage.
f) Deterioration of the footwear occurs over time, even if the footwear is not worn. This deterioration can compromise the safety of the wearer. This deterioration varies based on materials and construction method. This should be considered and discussed with your protective footwear supplier or manufacturer.CSA Z195.1 pdf download.