IEEE Std 603:2018 pdf download.IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations.
The criteria contained in this standard establish minimum functional and design requirements for the power, instrumentation, and control portions of safety systems for nuclear power generating stations. To satisfy the criteria in this standard, interface requirements may be imposed on the other portions of the safety system as shown in Figure 1. Safety system functional and design criteria are also contained in other standards.
1.2 Illustration
Figure 1 depicts the potential for interface requirements to be imposed on the other portions of the safety system.
2. Normative references
The following referenced documents are indispensable for the application of this document (i.e., they must be understood and used, so each referenced document is cited in text and its relationship to this document is explained). For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments or corrigenda) applies.
ANSI/ISA-67.04.01 -2006 (Reaff 2011), Setpoints for Nuclear Safety-Related Instrumentation.
IEC/IEEE 60780-323, Nuclear facilities — Electrical equipment important to safety — Qualification.
IEEE Std 74.3.2TM, IEEE Standard Criteria for Programmable Digital Devices in Safety Systems of Nuclear
Power Generating Stations
IEEE Std 308, IEEE Standard Criteria for Class 1 E Power Systems for Nuclear Power Generating Stations.
IEEE Std 338 TM, IEEE Standard for Criteria for the Periodic SurveillanceTesting of Nuclear Power Generating Station Safety Systems.
IEEE Std 352, IEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Systems and Other Nuclear Facilities.
IEEE Std 379, IEEE Standard for Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems.
IEEE Std 384 , IEEE Standard Criteria for Independence of Class 1 E Equipment and Circuits.
IEEE Std 420, IEEE Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations.
IEEE Std 497, IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations.
IEEE Std 577 TM, IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Power Generating Stations.
IEEE Std 1 023w IEEE Recommended Practice for theApplication of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities.
3. Definitions
For the purposes of this document, the following terms and definitions apply. The IEEE Standards Dictionary On line should be consulted for terms not defined in this clause.
acceptable: Demonstrated to be adequate by the safety analysis of the station.IEEE Std 603 pdf download.